RJ45/RJ45 shielded patch cable,  1:1 pin assignment according to TIA 568 B.
This patch cable is suitable for use in offices and data centers and is 4P PoE-compatible. Service assignment is optionally available with color marking clips, heat-shrink tubing, or laminated labels with custom customer printing on request. The cable meets the requirements of Cat. 8.1 according to ISO/IEC 11801, EN 50173-1, and TIA/EIA 568.2-D and is backward compatible with Cat. 6A, Cat. 6, and Cat. 5e. For setting up Class I transmission channels with up to 2 connectors for 30 m and 50 m according to ISO/IEC 11801, EN 50 173-1 ISO/IEC TR 11801-9909 Ed.1.0 (2020-06).

Standards:

• IEEE 802.3: Ethernet 10Base-T; Fast Ethernet 100Base-T; Gigabit Ethernet 1000Base-T; 10GBase-T; 40GBase-T (EoR/ToR); Supports 25GBase-T in accordance with ISO/IEC TR 11801-9905 (2018-02)
• IEEE 802.5 : ISDN ; FDDI ; ATM ; Cable sharing ; Video ; TV
• IEEE 802.3at : PoE/PoE+ compatible
• EN 50288-4-2 ; EN 50288-12-2 ; EN 50173 ; ISO/IEC 11801 2. issue ; IEC 61156-6 ; IEC 61156
• EN 60332-1-2 ; EN 60332-3-24 ; EN 50399 ; EN 50575 ; EN 61034 ; EN 50267 ; IEC 60754-2 ; IEC 61034; EN 13501-6 Class Fca 
• RoHS 2011/65/EU ; IEC 60811-2-1 (IRM 902, 4h at 70°C)

Environmental requirements:

• Temperature range -25°C to 60°C during operation, 0°C to 50°C during installation
• Free of hazardous substances according to RoHS 2002/95/EC

Transmission properties:

• 10 GBase-T link up to 90 m / channel 100 m according to IEEE 802.3 Section 4 up to 500 MHz. 
• 40 GBase-T to 30m
• 25 GBase-T to 30m
• GHMT Type Approval Certification in 2 Connector Channel 30m and 50m Class I up to 2GHz

Connector:

• RJ45 according to Cat. 8.1 ISO (2000 MHz) Component standard IEC 60603-7-81, 360 degrees shielded
• Type saCon (Fab. ZVK GmbH)
• Backward compatible with Cat.6A, Cat. 6, and Category 5e
• Guaranteed for up to 1500 plugging cycles
• Contacts with 30 µ inch gold layer thickness

Cable:

• Easylan S/FTP flex 1000; 4 pairs AWG26/7; Cat. 8.1 ISO/IEC Sheath FRNC/LSZH, halogen-free according to IEC 60754-2; low smoke according to IEC 61034; flame resistance according to EN 60332-1-2; color: gray
• Outer diameter 6.3 mm
• loop resistance 280Ohm/km
• insulation resistance 5 GOhm*km
• impedance 100 +/- 5 Ohm
• Probagation delay < 5ns/100m

Description	Order code xxxx = Length in dm
FlexBoot Patchkabel Kat. 8.1, Gray	CP18ADADAxxxx

Datasheet as PDF Download

Download

fixLink^® Cat. 8.1 - System overview

Download