Modules

preLink® SL RJ45 Keystone Module Cat.6A ISO/IEC, shielded

  • preLink® SL RJ45 Keystone Module Cat.6A ISO/IEC, shielded

With the preLink® SL RJ45 Keystone module, the user receives a top-quality RJ45 socket module with a maximum of flexibility. The preLink® SL RJ45 Keystone module makes it easy to just snap it onto the preLink® cable termination block. Thanks to an assembly process defined by way of preLink® assembly pliers, consistently high-quality assembly is ensured along with secure transmission performance. The
special contact geometry in combination with a 50 μ'' gold plating ensures PoE + according to IEEE 80.3at under all conditions. The housing material is made of nickel-plated die-cast zinc and thus meets the highest mechanical and environmental requirements. Use with the multi-design module holder permits combination with all switch product ranges. Various certifications (current list: www.easylan.de)
from independent test laboratories round out the highest quality demands of the preLink® system. The preLink® Keystone modules are delivered in an environmentally friendly cardboard box.

Datasheet as PDF Download

Download(AWG27-26)

Download(AWG24-22)

Assembly Instructions

Download

GHMT - Certificate as PDF Download

Download (Link-Zertifikat Draka UC900 HS23 Kat.7)

Download (Link-Zertifikat Draka 1500 HS22 Kat.7A)

Download (Link-Zertifikat SILVERLINE PREMIUM Cat. 7A)

Download (Link-Zertifikat SILVERLINE PREMIUM Cat. 7)

Download (Typmuster-Zertifikat Kat.6A)
 

Catalog page as PDF Download

Download

preLink® RJ45 Keystone Module L.E.O. Cat. 6A EIA/TIA, shielded

  • preLink® RJ45 Keystone Module L.E.O. Cat. 6A EIA/TIA, shielded

With the preLink® SL RJ45 Keystone module, the user receives a top-quality RJ45 socket module with a maximum of flexibility. The “Light Emitting Outlet“ (L.E.O.) technology uses a detector to light up matching cable ends. This function works with all common, shielded data cables for all patch points. The preLink® SL RJ45 Keystone module makes it easy to just snap it onto the preLink® cable termination block. Thanks to an assembly process defined by way of preLink® assembly pliers, consistently high-quality assembly is ensured along with secure transmission performance. The special contact geometry in combination with a 50 μ'' gold plating ensures PoE + according to IEEE 80.3at under all conditions. The housing material is made of nickel-plated die-cast zinc and thus meets the highest mechanical and environmental requirements. Use with the multi-design module holder permits combination with all switch product ranges. Various certifications (current list: www.easylan.de) from independent test laboratories round out the highest quality demands of the preLink® system. The preLink® Keystone modules are delivered in an environmentally friendly cardboard box.

Datasheet as PDF Download

Download

Catalog page as PDF Download

Download

preLink® SL RJ45 Keystone Module, angled Cat. 6A ISO/IEC, shielded

  • preLink® SL RJ45 Keystone Module, angled Cat. 6A ISO/IEC, shielded

With the angeled preLink® SL 75° Keystone module, the user receives a top-quality RJ45 socket module with a maximum of flexibility. The preLink® SL 75° Keystone module makes it easy to just snap it onto the preLink® cable termination block. Thanks to an assembly process defined by way of preLink® assembly pliers, consistently high-quality assembly is ensured along with secure transmission performance. The special contact geometry in combination with a 50 μ'' gold plating ensures PoE + according to IEEE 80.3at under all conditions. The housing material is made of nickel-plated die-cast zinc and thus meets the highest mechanical and environmental requirements. Use with the multi-design module holder permits combination with all switch product ranges. Various certifications (current list: www.easylan.de) from independent test laboratories round out the highest quality demands of the preLink® system. The preLink® Keystone modules are delivered in an environmentally friendly cardboard box.

Datasheet as PDF Download

Download

Catalog page as PDF Download

Download

preLink® RJ45 Connector Module Cat. 6A ISO/IEC, Shielded

  • preLink® RJ45 Connector Module Cat. 6A ISO/IEC, Shielded

The preLink® connector module provides users with a fieldinstallable RJ45 connector in Category 6A ISO/IEC 11801. The user simply crimps a preLink® cable termination block onto the cable end and clips the preLink® RJ45 connector module over it. The preLink® connector supports Power over Ethernet (PoE) according to IEEE 802.3af and PoE+ according to IEEE 802.3at. As a result, a connector can be installed in seconds on pre-assembled cables fitted with preLink® termination blocks. The preLink® cable termination block is available in two versions: in transparent yellow for installation cable with 4 pairs in AWG 23 -22, or in transparent white for flexible cable with 4 pairs in AWG 27-26. The novel IDC contacts ensure long-term stability and vibration-resistant contacting up to 10 Gigabit Ethernet

Catalog page as PDF Download

Download

preLink® RJ45 Extender Cat. 6A ISO/IEC, shielded

  • preLink® RJ45 Extender Cat. 6A ISO/IEC, shielded

The preLink® Extender enables cables to be extended with minimal effort. In addition, unused cables can be reactivated and extended to the next required connection. This results in optimal use of the tight space in the cable channel. The installer simply assembles the extender onto the end of the installed cable in the channel or on the wall. Once installation has been completed, the extended cable can be used up to the maximum link length, even for 10 Gigabit Ethernet transmission, and supports PoE+ (Power over Ethernet).

Datasheet as PDF Download

Download

Catalog page as PDF Download

Download

preLink® Cable Plug AWG 24-22, AWG 27-26

  • preLink® Cable Plug AWG 24-22, AWG 27-26

preLink® Cable Plug AWG 24 – 22, Transparent Yellow, for Installation Cable
Used to connect installation cables with solid wire in AWG 24 – AWG 22 range. Innovative IDC contacts ensure contacting in 10 Gigabit technology which remains stable over the long term and is resistant to vibration. The plug creates the basis for further set-up as Cat. 6 Class EA and Cat. 6A ISO/IEC with and without flashing function or other connectors.

preLink® Cable Plug AWG 27 – 26, Transparent White, for Flex Cable
For connecting flexible cables in the range of AWG 27 – AWG 26. Innovative IDC contacts ensure contacting for 10 Gigabit technology which remains stable over the long term and is resistant to vibration. The plug creates the basis for further set-up as Cat. 6, Class EA and Cat. 6A ISO/IEC with and without flashing function or other connectors.

Catalog page as PDF Download

Download

preLink® Tools and Accessories

  • preLink® Tools and Accessories

preLink® Installation Tool
The preLink® installation tool ensures the simultaneous, reliable pressing of all eight IDC contacts into their optimal position. The precise shortening of wire lengths ensures finalized assembly in a single step. The easy-to-use release lever allows every press point to be easily opened.

preLink® L.E.O. Detector
Detector is required to supply input voltage for modules featuring the L.E.O. Function.

Stripping Tool for Mantle and Foil of Data Cable
Stripping tool to remove mantle of any cable or to strip off metallic foil from any data cable. Color: Blue.

Copper strip
Copper adhesive tape to affix mesh screen. Pre-cut to 35mm x 9mm.

Dust Protection Covers
Colorful dust protection covers for preLink® SL and fixLink® SL Keystone module

Catalog page as PDF Download

Download