Splice housing

H.D.S.- splice boxes

Using H.D.S splice boxes, cables with a high number of fibers will be distributed to pre-configured 12 fiber H.D.S. trunk modules. They can be pulled out and they will be preequipped as required with up to 24 splicing cassettes. The splice cassette is dimensioned for 12 splices. The boxes are lockable. The H.D.S. trunk modules with 12 LC duplex ports can be installed in advance in the distributor field. The compact splice boxes are available in different sizes and also as a wall splice box for a maximum of 288 fibers. They are, for example, suitable as a housing splice distributor.

7HP splice module for assembly carrie

Couplings, splice cassettes and overlengths are installed in smallest spaces by adhering to the minimum bending radii of 50 mm. The modules can be equipped individually with established simplex, duplex and LC quad couplings. The modules are available in premium and standard designs, with the exception of the APC tuned and LSH variants.

FO splice housing

The EasyLan 19" FO splice housings are shipped in full metal design. They are 230 mm deep and at the front, they can be offset to the rear by 40 mm. The splice distributors are available in two
basic designs and one KVZ design:

- extendible OVA
- fixed OVB
- 200 mm deep KVZ variant with angled outlets

In addition, most variants are available in premium and standard designs, with the exception of the APC tuned and LSH variants. They are only available in premium quality. The cable is fed through 2PG screw connections or one fastening for breakout cables (see Accessories). Splice accessories can also be found under Accessories. The following order data only show the most
common variants. All other variants in the different foot prints can also be as quickly delivered on request.